|
Solar Thermal Components Combined Wholesale Price List
(10/01/2008)
|
| Component | | Price |
|
SOLAQUA-GOMAN
|
| | Solaqua-Coman Evacuated Tube Solar Collector GM-10 | $700.00 |
| | Solaqua-Goman Evacuated Tube Solar Collector GM-20 | $1,200.00 |
| | Solaqua-Goman Evacuated Tubes (individual) | $50.00 |
|
STIEBEL ELTRON
Packages
|
| SolKit 1 | $2,837.61 |
| 1 | SB 200 (52 gallon tank) | |
| 1 | Sol 25 Plus Flat Plate Solar Collector |
| 1 | Stiebel Eltron Flowstar Pump Station |
| 1 | SCM 6 Differential Controher |
| |
| SolKit 2 | $4,506.57 |
| 1 | SB 300 Plus (80 gallon tank) dual coil | |
| 2 | Sol 25 Plus Flat Plate Solar Collector |
| 1 | Stiebel Eltron Flowstar Pump Staton |
| 1 | SCM 6 Differential Controller |
| |
| SolKit 3 | $5,555.79 |
| 1 | SB 400 Plus (108 gallon tank) dual coil | |
| 3 | Sol 25 Plus Flat Plate Solar Collector |
| 1 | Stiebel Eltron Flowstar Pump Station |
| 1 | SCM 6 Differential Controller |
| |
| SOL 25 Plus Flat Plate Solar Collector | $902.88 |
| |
- Chromium oxide selective coating with 95% absorption
- Low iron tempered giass with 92% transmittance
- Corrosion resistant aluminum construction
- Low profiie at 3" thickness
|
|
|
TANKS
|
| SB 150 S | Solar Storage Tank - 40 gal. | $ 867.00 |
| SB 200 S | Solar Storage Tank - 52 gal. | $ 975.00 |
| |
- Single heat exchanger
- Heat exchangers are heavy gauge steel with porcelain enamel coating
- 2" foam insulation for low standby heat loss
- Replaceable sacrificial anode rod
| |
| SBB 300 S | Solar Storage Tank - 82 gal. | $1523.00 |
| SBB 400 S | Solar Storage Tank - 110 gal. | $1650.00 |
| |
- Single heat exchanger
- Heat exchangers are heavy gauge steel with porcelain enamel coating
- 3" foam insulation for low standby heat loss
- Thermometer
- Replaceable sacrificial anode rod with wear indicator
| |
| SBB 300 Plus | Solar Storage Tank - 80 gal. | $1,741.00 |
| SBB 400 Plus | Solar Storage Tank - 108 gal. | $1887.00 |
| SBB 600 Plus | Solar Storage Tank - 163 gal.
(is not ASME approved) | $2,909.00 |
| |
- Dual heat exchanger
- Heat exchangers are heavy gauge steel with porcelain enamel coating
- 3" foam insulation for low standby heat loss
- Thermometer
- Immersion wells for control sensor
- Replaceable sacrificial anode rod with wear indicator
| |
|
Hardware
|
| Mounting frame for two SOL 25 Plus collectors (vertical install) | $150.00 |
| |
- Mounting frame for t~ic SCL25 Plus collectors. For vertical installation.
- En combination with the BP, SW, BR Sand SF W mounting hardware sets, permits
installation on wood! shingled roofs, metal roofs, fiat roofs or wails.
- Can also be used to mount one collector, horizontal.
| |
| Mounting frame for one SQL 25 Plus coliector (vertical install) | $74.00 |
| |
- Mounting frame for one S0L25 Plus collector. For vertical installation.
- In combination with the SP, BW. BF Sand BF W mounting hardware sets, permits
installation on wood! shingled roofs, metal roofs, fiat roofs or walls.
| |
| 45° Mounting hardware, SOL 25 Plus (horizontal orientation) | $73.00 |
| |
- For horizontal installation on flat roof or wall.
Contents:
- 1 support, vertical
- 1 support, horizontal
- 1 support, transverse
- 1 brace
- 1 set each M l0 and M6 nuts and bolts
** Two needed per frame
| |
| 45° Mounting hardware, SOL 25 Plus (vertical orientation) | $118.00 |
| |
- For horizontal installation on flat roof or wall.
Contents:
- 1 support, vertical
- 1 support, horizontal
- 1 support, transverse
- 1 brace
- 1 set each Ml 0 & MC nuts and bolts
** Two needed per frame
| |
| Frame tilt system for SOL 25 Plus | $109.00 |
| |
- Frame tilt system for adjusting tilt on roofs 10 to 30 degrees.
Contents:
- AdjustabLe riser strut set
- 4 L brackets
- 1 brace
- 5 sets M10 nuts and bolts
- 5 sets M6 x 2 nuts and bolts
** Two needed per frame
| |
| Flush mount kit for SOL 25 PIus | $98.00 |
| |
- Contents:
- 4 L brackets
- 2 collector rails
- 8 sets Ml0 nuts and bolts
** One needed per frame
| |
| Frame tilt system for SOL 25 Plus - horizontal | $ 109.00 |
| |
- Frame tilt system for adjusting tilt on roofs 10 to 30 degrees
Contents:
- Adjustable riser strut set
- 4 L brackets
- 1 brace
- 5 sets M10 nuts and bolts
- 5 sets M6x2 nuts and bolts
** Two needed per frame
| |
| Flush mount kit for SOL 25 Plus - horizontal | $98.00 |
| |
- Contents:
- 4 L brackets
- 2 collector rails
- 8 sets M10 nuts and bolts
** One needed per frame
| |
| Frame connector kit for SOL 25 Plus | $26.00 |
| |
- Frame connector kit to join multiple roof mounting frames fore row of collectors.
Contents:
- 2 frame connectors
- 8 Ml0 nuts and bolts
| |
| Flexible stainless steel tube for SOL 25 Plus | $31.00 |
| |
- This fIexibIe connector tube will provide the plumbing connection between two collectors.
| |
| SE Flowstar Pumping Module | $655.00 |
| |
- Circulator
- 2 Boiler drains
- 1 Check valve
- 1 Expansion tank
- 1 Pressure relief valve
- I Temp ‘pressure gauge
- 1 Flowmeter
- 1 Return thermometer
- 1 Air vent
| |
| SOM 6 controller | $185.00 |
| |
| |
| SOM 7 controller | $ 263.00 |
| |
- Solar loop and auxiliary controller
| |
| Goldline controller | $ 146.00 |
| |
- Goldline differential controller
- Line cord outlet for circulator
| |
| 1K Sensortor SOM controller | $21.00 |
| |
- 1K Immersion / strap on sensor for SCM 6 and SCM 7 controllers
| |
| Sensor well | $14.00 |
| |
- Well for sensor, used in conjunction with solar differential controller
| |
| Red indicator anode rod / SBB tank | $ 3.00 |
| Anode for 300 – 400 tank | $36.00 |
